Moving The Generator; High Altitude Operation - Homelite UT903655DA Manuel D'utilisation

UNDERSTANDING THE DIGITAL DISPLAY
See Figure 13.
The digital display shows AC voltage output, frequency, how
long the engine has been running during the current usage
period, and the total number of hours the unit has been used.
To cycle through these displays, press the select button. The
information type on the digital display will light in sequence
to show which type of information is being displayed.
Hour meter: The hour meter keeps track of how many hours
the unit has been running during the current operation as
well as the total number of hours the unit has been used.
AC voltage: When selected, the AC voltage indicator will
display the generator's voltage output.
Frequency: When selected, the frequency indicator shows
the generator's output frequency.

MOVING THE GENERATOR

 Turn the engine switch OFF. Disconnect any equipment
that is plugged into the generator.
 Turn the fuel valve to the OFF position.
 Allow 30 minutes of "cool down" time before storing the
machine.
 Tilt the machine away from you until it balances on the
wheels, then roll the machine to the desired location.
OPERATION

HIGH ALTITUDE OPERATION

Specific modifications are needed for high-altitude operation.
Please contact your authorized service center for important
information regarding these modifications. Operating this
engine without the proper altitude modification may increase
the engine's emissions and decrease fuel economy and
performance.
Page 15 — English