MITACA Cecchetto Coffee Excellence M5 Instructions D'utilisation page 27

Starting up/heating
• Use only specific capsules for the machine model
• Connect the machine by inserting the plug in the power
socket.
• Switch on the machine with the main switch (2).(Fig.4)
• The control buttons will start to blink slowly; once they
reach the temperature, the buttons will light up with a fixed
light, indicating that the machine is ready for use (Fig.4).
Rinsing the machine/inner circuits
The machine should be rinsed both at its very first use and
when it has been inoperative for a long spell of time. By
performing this quick procedure, you will ensure that all
inner circuits are rinsed.
• Close the small cup support (10) and place a large cup
on the grid (5)
(Fig. 5)
• Press the rinse button (D) (Fig. 6) and wait until dispensing
is finished. In this way the machine is rinsed.
N.B.
The control panel of the machines has touch buttons, it is
sufficient to press lightly on the illuminated signal.
To prepare tea or long espresso, close the small cup support
(10).
To prepare espresso coffee correctly, lower the small cup
support (10).
(Fig. 7).
Fig.7
10
Fig.6
25
Fig. 4
10
Fig.5
D
2
5