MITACA Cecchetto Coffee Excellence M5 Instructions D'utilisation page 28

Programming dispensing
• Switch on the machine and within one second press and hold down the
button (D) for about 3 seconds (Fig. 8).
• As soon as you hear the buzzer release the button.
• The machine resumes normal operation and the icons with programmable
adjustments are indicated with slow blinking.
It is now possible to regulate the quantity of the dispensed beverage.
• Activate dispensing by pressing the button for the beverage to be
programmed and, on reaching the desired quantity, press the button again;
in this way the quantity is automatically saved in the memory.
• Repeat the procedure described above for each of the dispensing operations
you want to program.
• Switch off the machine with the button (2) to save and quit programming
mode.
Preparation of coffee/tea/beverages
• Use only specific capsules for the machine model.
• Place the cup under the coffee dispensing spout.
• Lift the control lever (1) slowly backwards until it stops and insert a capsule in the space provided
(Fig. 9).
• Close the lever (1) completely and press one of the dispensing buttons, long
(E) as preferred. If inserting a tea capsule press the button
(Fig. 10)
• Dispensing is indicated with the lighting of only the led corresponding to the type of dispensing
chosen.
N.B.
• Dispensing stops automatically. If you want to interrupt dispensing earlier, press the selected button
again.
• To extract the capsule, slowly lift the lever (1).
If the capsule is not ejected, repeat the operation or press one of the dispensing buttons and lift
the lever (1) at the same time.
1
Fig. 9
(C)
1
26
Tasti comandi
Touch
D
Fig. 8
(D) or short
C
D
E
Fig. 10