4-Measurement; Measurement Of Single Distance; Continuous Measurement (Detection) - Beta 1693 Manuel De L'utilisateur

4-Measurement

4-1.Measurement of single distance

Press to activate the laser.
Press again to activate distance measurement. The
measured value is displayed immediately.
4-2.Continuous measurement (detection) and minimum
measurement (See "Figure E")
The continuous measurement function (tracking) is used
for transferring measurements, for example from
construction plans.
Continuous measuring mode, the measuring instrument
can be moved to the target, according to which the
measured value is updated approx. every 0.5 seconds in
the third row. The corresponding minimum value is
dynamically displayed in the first row.
For example, the user can move from a wall to the
required distance,
while the actual distance can be read continuously. For
continuous measurement, long press the MEAS button
will start continuous measurement. And print
MEAS again to stop the function. The function ended
automatically after a continuous measurement of 100
times.
MIN data will be displayed in rows 1.
MIN
Figure E
15