Other Settings: Displays Other Setting Options Of The Tv Set; Install And Retune Menu Contents - Telefunken H39V1 Mode D'emploi

Other Settings: Displays other setting options of the TV set:

Menu Timeout
Scan Encrypted
Channels
Blue Background
Software Upgrade
Application Version
Hard of Hearing
Audio Description
Auto TV Off
Standby Search
(Optional)
Store Mode
Power Up Mode
Biss Key

Install and Retune Menu Contents

Automatic Channel
Scan (Retune)
(If available)
Manual Channel Scan
Network Channel Scan
Analogue Fine Tune
First Time Installation
Clear Service List
CEC
Changes timeout duration for menu screens.
When this setting is on, the search process will locate the encrypted channels as well.
Activates or deactivates the blue background system when the signal is weak or absent.
To ensure that your TV always has the most up to date firmware.
Displays application version.
Enables any special feature sent from the broadcaster.
Audio description refers to an additional narration track for blind and visually
impaired viewers of visual media, including television and movies. You can use
this feature, only if the broadcaster supports that additional narration track.
You can set the timeout value of auto off feature. When the timeout value is reached
and the TV has not been operated for a selected time, the TV will go into standby mode.
If the Standby Search is set to On, when the TV is in standby mode, available
broadcasts will be searched. If the TV locates any new or missing broadcasts, a
menu screen will be displayed, asking you whether or not to execute these changes.
The Channel list will be updated and changed after this process.
If you are displaying the TV in a store, you can activate this mode. Whilst Store
Mode is enabled, some items in the TV menu may not be available.
This setting confrigures the power up mode preference.
Biss is a satellite signal scrambling system that is used for some broadcasts. If
you need to enter BISS key on a broadcast, you can use Biss Key setting located
in the Other Settings menu. Highlight Biss Key and press OK to enter keys on
the desired broadcast.
Displays automatic tuning options. Digital Aerial: Searches and stores aerial
DVB stations. Digital Cable: Searches and stores cable DVB stations. Analogue:
Searches and stores analogue stations. Digital Aerial & Analogue: Searches
and stores aerial DVB and analogue stations. Digital Cable & Analogue:
Searches and stores cable DVB and analogue stations. Satellite: Searches and
stores satellite channels.
This feature can be used for direct broadcast entry.
Searches for the linked channels in the broadcast system.
You can use this setting for fine tuning analogue channels. This feature is not
available if no analogue channels are stored.
Deletes all stored channels and settings, resets TV to factory settings.
(*) This setting is visible only when the Country option is set to Denmark, Sweden,
Norway or Finland. Use this setting to clear channels stored.
With this setting you can enable and disable CEC functionality completely.
Press Left or Right button to enable or disable the feature.
English - 33 -