Changing the Metronome Interval
To change the metronome's note division (the note value it measures with each click):
1.
Press the Click button and 3 button simultaneously.
2.
The Display will show the current interval. Use the – / + buttons to select a
new interval: 2 (half note), 3 (triplet), 4 (quarter note), 6 (sextuplet), 8 (eighth
note), or 16 (sixteenth note). The default is 4.
3.
Wait 4 seconds. The drum module will automatically save the new setting.
Using the Built-In Drum Coach
The Built-In Drum Coach contains five different exercises to help you develop and improve your
accuracy, stamina, and sense of tempo: Beat Check, Gradual Up/Down, Rhythm Change Up,
Follow Me, and Drum Mute.
To use the Built-In Drum Coach, press the Pattern button and Tempo button at the same time.
Then, press the 1, 2, 3, 4, or 5 button that corresponds to the exercise you want to do. The Display
will show which exercise you have selected:
1.
Beat Check (bCH)
2.
Gradual Up/Down (GUd)
3.
Rhythm Change Up (C-U)
4.
Follow Me (FLo)
5.
Drum Mute (d-U)
Beat Check
This exercise evaluates your sense of timing and how accurately you play along with the metronome.
To use Beat Check:
1.
Press the Pattern button and Tempo button at the
same time. Then press the 1 button.
2.
Set the metronome's time signature and interval (as
described in
Using the Metronome
3.
Press the Start/Stop button to begin.
4.
Hit the pads in time with the metronome. The six
LEDs of the 1-5/Variation buttons indicate how
accurate or "in time" you are.
• When you are right on the beat, the 3
and 4 buttons light up.
• When you are slightly off the beat, the 2
or 5 button will light up.
• When you are off the beat, the 1 or
Variation button will light up.
• When you are completely off the beat, no
buttons will light up.
5.
Press the Start/Stop button to stop.
10
(Click)).
1
SLOW
1
COACH
PATTERN
TEMPO
2
3
4
GOOD
3
CLICK
START
/STOP
5
VARIATION
FAST