FS UMC-2S Guide De Démarrage Rapide page 5

Bottom Panel (DIP Switch)
NO
1 SW1
SW2
2 SW3
SW4
NOTE:
2 SW3 and SW4 are combination switches
3
ALS (Automatic Laser Shutdown) Function: If enabled, the
output power of the SFP transmitter will be automatically shut
down in case of ber break.
4
LFP (Link Fault Pass Through) Function: If enabled, when a
device is connected to the converter and the TP/ ber line loses
the link, the converter's ber will disconnect the link of transmit.
5 LOOP Function: Run a loop back test to check the
interconnection between two Media Converter devices.
Status
OFF/OFF
ON/OFF
OFF/ON
ON/ON
OFF/OFF
ON/OFF
OFF/ON
ON/ON
SW1 and SW2 are combination switches
1
ON KE
1 2 3 4
Description
125M-11.3G
10.35-11.7G
8.5G
N/A
Normal
3 ALS enable
4 LFP enable
5 LOOP enable
EN - 4 -