ETNA RA345BEI Mode D'emploi page 54

USE
EN 6
Entering a new code for the cooker hood
When interference prevents the remote control from working properly,
a new code can be entered.
1. Touch the remote control's (-) and (+) keys simultaneously for at
least 10 seconds.
▷ The LED on the remote control lights.
2. Once again, touch the (-) and (+) keys simultaneously within
3 seconds.
▷ The LED on the remote control flashes 3x.
3. Work through the steps for linking the remote control.
Replacing the battery
Remove the remote control's cover and replace the battery with a
battery of the same type and voltage. The battery is chemical waste
and must be disposed of in a responsible manner and in accordance
with government regulations.
+ 23A