Standard Accessories; Applications; Battery Removal/Installation - Hitachi Koki DV 14DMR Mode D'emploi

English
SPECIFICATIONS
POWER TOOL
Model
No-load speed (Low/High)
No-load impact rate (Low/High)
Brick
(Depth 30 mm)
Wood
Drilling
(Thickness 18 mm)
Capacity
Metal
(Thickness 1.6 mm)
Machine screw
Driving
Wood screw
Rechargeable battery
Weight
CHARGER
Model
Charging voltage
Weight

STANDARD ACCESSORIES

1 Plus driver bit (No. 2 × 65L) ...... 1
2 Charger (UC14YFA) ......................... 1
DV14DMR
3 Side handle ...................................... 1
4 Plastic case ....................................... 1
1 Plus driver bit (No. 2 × 65L) ...... 1
2 Charger (UC24YFA) ......................... 1
DV18DMR
3 Side handle ...................................... 1
4 Plastic case ....................................... 1
Standard accessories are subject to change without notice.
OPTIONAL ACCESSORIES (sold separately)
1. Battery (EB14B, EB1424, EB1426H, EB1430H)
(For DV14DMR)
7
0 – 400 / 0 – 1750 min
0 – 4800 / 0 – 21000 min
Aluminum: 13 mm
8 mm (diameter) × 75 mm (length)
(Requires a pilot hole)
EB14B: Ni-Cd 14.4 V (2.0 Ah 12 cells)
EB1424: Ni-Cd 14.4 V (2.4 Ah 12 cells)
EB1426H: Ni-MH 14.4 V (2.6 Ah 12 cells) EB1826HL: Ni-MH 18 V (2.6 Ah 15 cells)
EB1430H: Ni-MH 14.4 V (3.0 Ah 12 cells) EB1830HL: Ni-MH 18 V (3.0 Ah 15 cells
UC14YFA/UC24YFA
7.2 – 14.4 / 7.2 – 24 V
0.6 kg
DV14DMR
–1
–1
14 mm
45 mm
Steel: 13 mm,
6 mm
2.5 kg
2. Battery (EB1820L, EB1824L, EB1826HL, EB1830HL)
(For DV18DMR)
Optional accessories are subject to change without notice.

APPLICATIONS

Drilling of brick and concrete block, etc.
Driving and removing of machine screws, wood
screws, tapping screws, etc.
Drilling of various metals
Drilling of various woods

BATTERY REMOVAL/INSTALLATION

1. Battery removal
Hold the handle tightly and push the battery latch (2
pcs.) to remove the battery (see Figs. 1 and 2).
CAUTION
Never short-circuit the battery.
2. Battery installation
Insert the battery while observing its polarities (see
Fig. 2).
DV18DMR
0 – 400 / 0 – 1800 min
0 – 4800 / 0 – 21600 min
16 mm
50 mm
Steel: 13 mm,
Aluminum: 13 mm
6 mm
8 mm (diameter) × 100 mm (length)
(Requires a pilot hole)
EB1820L: Ni-Cd 18 V (2.0 Ah 15 cells)
EB1824L: Ni-Cd 18 V (2.4 Ah 15 cells)
2.7 kg
–1
–1