Sony CPD-L181A Mode D'emploi page 7

Step 3: Attaching the rear cover
After connecting the computer and power cord, attach the
supplied rear cover.
Make sure that you keep the screen upright when attaching
the rear cover.
1
Hook the computer cable and power cord.
2
Press the top of the rear cover against the top of the
part for attaching the cover, and then push the rear
cover in.
3
Turn the screw to fasten the rear cover.
Unlocked
1
2
Locked
Getting Started
Use of the Tilt
The tilt feature will adjust the monitor within 30° upward,
and 45° to the left or right. However, best viewing results
can be obtained by tilting the screen upward by 5° or more.
To turn the monitor, hold at the bottom with both hands as
illustrated below.
30°
45°
Getting Started
45°
7
GB
F
D
ES
I