Power Terminals - Lenze ECSEE 012 Instructions De Montage

4 Electrical installation

Power terminals

4.3 Power terminals
{
Danger!
Hazardous electrical voltage
The leakage current to earth (PE) is > 3.5 mA AC or > 10 mA DC.
Possible consequences:
ƒ
Protective measures:
Implement the measures required in EN 61800−5−1. Especially:
ƒ
ƒ
(
Stop!
No device protection if the mains voltage is too high
The mains input is not internally fused.
Possible consequences:
ƒ
Protective measures:
ƒ
ƒ
All power connections are plug connections and are coded. The connector
ƒ
set for the ECSZE000X0B power supply modules must be ordered
separately.
Installation of cables acc. to EN 60204−1.
ƒ
The cables used must comply with the approvals required for the
ƒ
respective application (e.g. VDE, UL, etc.).
82
Death or severe injuries when touching the device in the event of
an error.
Fixed installation
– Implement PE connection in compliance with standards.
– Connect PE conductor twice or PE conductor cross−section
³ 10 mm
2
.
Connection with a connector for industrial applications according
to IEC 60309 (CEE):
– PE conductor cross−section ³ 2.5 mm
supply cable.
– Provide for suitable strain relief.
Destruction of the device if the mains voltage is too high.
Observe the maximally permissible mains voltage.
Fuse the device correctly on the supply side against mains
fluctuations and voltage peaks.
2
as part of a multi−core
l
EDKCSEE040 DE/EN/FR 5.0