Troubleshooting - Witt WPS200B Mode D'emploi

TROUBLESHOOTING

Fault
The machine does not work
Peculiar smell is from motor unit
Abnormal vibration or large noise is
present on the machine
Many residues in juice
The filter is blocked
Possible cause
Poor contact between power plug
and socket
Cover is not rotated in place
Motor is first used and this is a
normal phenomenon
Machine overloading for operation
Motor unit failure
Juice filter damage
Wide-mesh filter is used to squeeze
hard fruit
This product is not applicable to
squeezing some fruits
Overloaded amount for processing
The filter is not cleaned
Remedy
Re-insert the plug or change the
socket and then try again
Rotate the cover in place according
to the indication in the user guide
This phenomenon occurs in the first
several uses and this is normal.
Check whether the voltage is that
indicated in the nameplate.
Turn off machine power and remove
the power plug; then send it to the
local specified maintenance station
for repair or dial the service hotline.
Turn off machine power and remove
the power plug; then send it to the
local specified maintenance station
for repair or dial the service hotline.
Use the fine-mesh filter to squeeze
hard fruit
This product is not applicable to
squeezing fruits and vegetables that
have continuous fiber and is fibrous
and hard
1. Turn off machine power and
remove the power plug; after
the machine completely stops
rotation, clean the feed pipe,
squeezer, filter and cup.
2. Check amount for processing and
processing time according the
user guide
Clean the filter
EN EN
33