ClickTronic 60810 4K Mode D'emploi page 20

VIDEO:
highest format,
supported by both output
devices
AUDIO:
Looping following FIXED
formats (AAC/Dolby5.1/
DTS5.1/Stereo)
VIDEO:
highest possible output
format
AUDIO:
Looping following FIXED
formats (AAC/Dolby5.1/
DTS5.1/Stereo)
corresponds to the setting
VIDEO/AUDIO:
highest possible output
format
Please keep in mind that the source and output devices
at too high selected and non-supported video and
audio formats will show no picture and / or sound.
>>
Starting
Mode
Output A
& B
-
adjusted
to use one
source
device
together
SPLITTER
MODE
Output A
& B
-
adjusted to
use several
source de-
vices
MATRIX
MODE
20
1080p/Stereo
1080i/Stereo
1080p/Stereo
1080i/Stereo
1080p/Stereo
1080i/Stereo
Correctly set the output format.
supported
• The source device
automatically adjusts to
a audio- and video for-
mat, supported by all
connected devices.
The output device with
the highest compatibili-
ty to the source device
will be adjusted as
primal device.
(mode of the highest
common accordance)
• You can also adjust
the audio-/video signal
manually. Make sure,
the output devices
support these adjust-
ments.
• The source device
automatically adjusts to
a audio and video for-
mat, supported by the
output devices.
(output A or B)
• You can also adjust
the audio-/ video signal
manually. Make sure,
the output devices
support these adjust-
ments.
1080i/ 1080i/
Dolby5.1, Stereo as adjusted
720p/
Dolby5.1, Stereo
1080i/ 1080p/
Dolby5.1, Stereo as adjusted
720p/
Dolby5.1, Stereo
1080i/ 1080p/
Dolby5.1, Stereo Dolby5.1
720p/
Dolby5.1, Stereo
not supported
• The audio-/video
format of the source
device must be adjus-
ted first.
• Please make sure,
the output devices
support these adjust-
ments.
(e.g.You want the
source device sending
a 2160p video signal,
although the output
device only supports
up to 720p or 1080i.
Then no picture will be
shown.)
• The audio-/video
format of the source
device must be adjus-
ted first.
• Make sure, the output
devices support these
adjustments.
Clicktronic®