Universal Use
(with SPDIF/TOSLINK AV Receiver and 2HD TVs):
5.2 Preparation:
To set the audio output caliber, read the manual of
the source device.
1. Check the audio format of the movie or of
the TV signals. (stereo / DTS® 5.1/or Dolby®
Digital 5.1, 7.1 etc.)
2. Adjust the audio format of the source device
(e.g. uncompressed PCM- or digital Dolby
signals (Dolby® 5.1, 7.1))
3. Select the output of the respective audio
format and the language
menu.
•
If the output devices do not support the ad
justed audio format (HDTV, Receiver or spea-
ker system), you will hear noise or no tone at
all. In doubt make sure of having connected
all components correctly.
•
In case of using a home cinema system or
another speaker system, we recommend to
mute the speaker of your HD TV.
•
The product comes with a mode, named
"highest common accordance". By using the
Quad HD Matrix in splitter mode, the source
device with the lowest standard will be auto-
matically adjusted as primal device.
•
We recommend choosing the same high reso-
lution, color depth and audio format of the
source device and output device.
5.3 Operation:
5.3.1 Quad HD Matrix:
In this mode you can choose one source device per
output device.
In this mode you can transmit the signal of one
source device to both output devices.
Clicktronic®
by using the main
17