Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
SPECIFICATIONS
Capacities
No load speed (RPM)
Impacts per minute
Max. fastening torque
Battery Charger
Input
Output
Battery Cartridge
Voltage
Charging time
• Due to our continuing programme of research and development, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
GENERAL SAFETY RULES
(FOR ALL BATTERY OPERATED TOOLS)
WARNING:
Read and understand all instructions.
Failure to follow all instructions listed below,
may result in electric shock, fire and/or seri-
ous personal injury.
SAVE THESE INSTRUCTIONS
Work Area
1.
Keep your work area clean and well lit. Cluttered
benches and dark areas invite accidents.
2.
Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
Model
Standard bolt
High tensile bolt
Square drive
High
Low
High
Low
High
Low
Overall length
Net weight
DC24SA
BH2420
30 min.
A.C. only 50 Hz - 60 Hz
D.C. 7.2 V - 24 V
BH2433
60 min.
3.
Keep bystanders, children, and visitors away
while operating a power tool. Distractions can
USA003-2
cause you to lose control.
Electrical Safety
4.
A battery operated tool with integral batteries or
a separate battery pack must be recharged only
with the specified charger for the battery. A
charger that may be suitable for one type of battery
may create a risk of fire when used with another bat-
tery.
5.
Use battery operated tool only with specifically
designated battery pack. Use of any other batter-
ies may create a risk of fire.
Personal Safety
6.
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use tool while tired or under the influence of
drugs, alcohol, or medication. A moment of inat-
tention while operating power tools may result in
serious personal injury.
2
BTW200
M10 - M16 (3/8" - 5/8")
M10 - M12 (3/8" - 1/2")
12.7 mm (1/2")
0 - 2,000/min.
0 - 1,600/min.
0 - 3,000
0 - 2,500
200 N.m (144 ft.lbs)
150 N.m (108 ft.lbs)
226 mm (8-7/8")
2.8 kg (6.1 lbs)
DC24WA
BH2420
24 V
55 min.
BH2433
90 min.
Publicité
Table des Matières
