Sissel SPINEFITTER Mode D'emploi page 9

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
5. CARE & HYGIENE
Clean the SPINEFITTER with a soft cloth
and a mild soap and water solution. Optical
contamination must be removed before-
hand.
The surface of the SPINEFITTER can be
disinfected by wiping with an alcohol free
solution.
Disinfection products that contain caustic
substances (e. g. acids, alkalis) should be
avoided as they can damage the surface of
the product.
Warning
Disinfection measures are to be carried
out exclusively with suitable disinfectants
that have been tested for effectiveness.
The application instructions of the disin-
fectant manufacturer must be observed.
Disinfectants that can damage the mate-
rials of the product must be avoided.
The use of unsuitable disinfection agents
or agents that have not been tested for
effectiveness or their incorrect use will
invalidate the warranty and guarantee
claims.
6. DISPOSAL & ENVIRONMENT
Product: The product and the accessories
supplied can be disposed of with household
waste.
Packaging: No special types of packaging are
used. The respective valid disposal guidelines
must be observed.
7. WARRANTY
The warranty is governed by the statutory
provisions.
Any warranty is excluded if goods delivered by
SISSEL
GmbH have been handled, treated or
®
modified by others without consent or if the
instructions for use have not been followed.
EN

Publicité

Table des Matières
loading

Table des Matières