Technical Data - Faber GALILEO SMART BK A600 Manuel D'utilisation

When a cooking area is active, it may
hum briefly. This is a characteristic of all
ceramic glass hobs and does not impair
the function or life of the appliance. The
16. TROUBLESHOOTING
Description
Error code
The hood command does
"Acoustic signal
not work
upon ignition. No er-
ror code displayed"
Hob switches off after 10
ER03
sec.
Hob switches off.
ER21
Corresponding
E2
area switches off.
Corresponding
E3
area switches off.
Hob does not switch on.
E6
Cooking areas are turned
E8
off.
E4
E5
Disconnect the hob from the power supply.
E7
Wait a few seconds, then reconnect the hob to the power supply.
E9
If the problem persists, call the After Sales Service and specify the error code that appears on the dis-
ER20
play.
ER22
ER31
ER36
ER42
ER47
EA
EH

17. TECHNICAL DATA

Product identification
Type: 4300
Model: GALILEO SMART BK A600
Model: GALILEO SMART BK F600 + Kit
LL H80
noise depends on the pan used. If it
causes considerable disturbance, it may
help to change the pan.
Possible causes of the error
LIN cable damaged or badly connec-
ted to the hood electronic board
Continuous key activation detected.
Water or pan placed on the control
panel.
The internal temperature of elec-
tronic parts is too high.
cooking Empty or unsuitable pan.
Pan or ceramic glass surface tem-
perature too high.
Electronic component temperature
too high.
cooking Unsuitable pan.
The pan is losing its magnetic prop-
erties and may damage the induction
hob.
Power supply voltage and/or fre-
quency is out of range.
Fan fault.
Fan blocked by dust or fibres.
Please see the identification plate af-
fixed to the bottom of the product.
The manufacturer makes continual im-
provements
reason, the text and illustrations in these
instructions for use may change without
warning.
Solution
check connection/replace the LIN
cable
Remove water or pan from the
ceramic glass surface and control
panel.
Let the hob cool down.
Please check if the hob has suffi-
cient ventilation.
If the error persists, please contact
After Sales Service.
Let the hob cool down.
Use a suitable pan.
Do not heat empty pans.
Use a suitable pan.
The error is automatically cancelled
after 8 seconds and the cooking
area can be used again.
If any other errors occur, the pan
must be changed.
If the error persists, please contact
After Sales Service.
Check mains voltage and/or fre-
quency.
If necessary, contact After Sales
Service.
Clean and remove foreign bodies
from the fan.
If the error persists, please contact
After Sales Service.
to products. For this
15