Aux-In Function - iCES IBTS-6 Mode D'emploi

3.7. Phoning function
1. When there is an incoming call during Bluetooth music playing mode, the ringing sound will
appear and the currently playing music will automatically be paused.
2. Press the " /
3. Now you are using the phoning function with the Bluetooth speaker.
4. Press the " /
being paused, will resume to play automatically.
5. Press and hold the "
Tip: Speak to the "MIC" (10) hole directly with a distance between 30~60cm to get the best
speakerphone performance, if necessary.
3.8. Re-dial for Last Call Function
This function is to re-dial the last-called number with the Bluetooth Speaker, even when it is in music
playing mode.
1. Press the " /
playing will automatically pause and switch to the phoning function for redial.
2. Press the " /
3. Make sure that your mobile phone has a 'last called' number in its record; if not, re-dialing the
last-called number cannot be activated.

3.9. AUX-IN Function

1. In the power ON mode, connect the Bluetooth Speaker's "AUX IN Jack" (9) with an external
device's "Earphone/AUX/LINE" Output through the Audio Cable (Provided).
2. The Bluetooth Speaker will switch to "AUX In" mode automatically from the Bluetooth mode,
and the " MODE" Indicator (7) will switch to a long light instead of blinking.
3. At the same time, the RGB decoration lights will turn on automatically once AUX In is in the
connected mode.
4. Now the AUX In function is ready, start to play music from your external device by its controls
and/or program: for example Play, Stop, Volume Control etc.
(5)" button to pick up the call if you want.
(5)" button again to hang up the call when it's finished. The music that was
/ (5)" button for 3 seconds to ignore the incoming call.
" (5) button twice to enter into the re-dialing function; the music that's
" (5) button again to finish the redialed call.
7