iCES IBTS-6 Mode D'emploi page 5

3. Using the Speaker
3.1. Rechargeable Battery & Charging
This Bluetooth Speaker has an internal, non-user-replaceable battery. For the best results, the first
time you use this Bluetooth Speaker, let it charge for about 2 ~ 3 hours, or until the red "
indicator (7) light switches to off; this means the battery is fully charged.
To maintain the battery life and performance, you should recharge the battery if the speaker isn't
used for a while. Charge the battery at least once every month.
To recharge the built-in battery:
1. Connect the Bluetooth Speaker's "Micro USB Socket" (8) with the Computer's USB port through
the USB cable (provided).
2. The " MODE" Indicator (7) will show a red light, which means the battery is charging.
3. The " MODE" Indicator (7) will turn automatically off when the battery is fully charged.
4. Disconnect the USB cable when it is done with charging.
3.2. Power On/Off and Pairing
1. Press and hold the "
the " MODE" Indicator (7) will rapidly flash blue in seconds from blinks. The speaker is in the
Bluetooth pairing mode.
2. Then activate the Bluetooth function on your mobile device (such as a Smartphone or Personal
Computer); the device will enter to Bluetooth searching mode automatically. If this doesn't
happen, tap the related selection to manually enter to searching mode. (refer to your device's
manual if necessary).
3. Your mobile device should show "ICES IBTS-6" in the Bluetooth Devices list, and then select it
for pairing. Wait for some seconds and you will see the message that you are connected on your
mobile device. Note: For some Bluetooth devices, you may need to input "0000" as pairing
password.
4. If the pairing is successful, a beep sound will be heard and the "
switch to slow blinking blue instead of fast.
5. At the same time, the RGB decoration lights will turn On automatically once Bluetooth is in
paired mode.
6. Now, you can start to play music from your mobile device by its music player program.
7. To power OFF the speaker, press and hold the "
Note:
To save battery energy, the Bluetooth Speaker will turn to the off mode automatically when no
-
device is paired in 8 minutes.
The RGB decoration lights cannot be turned on when the speaker in Bluetooth at
-
searching/pairing mode.
/
" (3) button to turn on the device; a series of tones will sound and
MODE" Indicator (7) will
/
" (3) button.
MODE"
5