Troubleshooting; Care And Maintenance - Electrohome EAAC302 Manuel D'utilisation

If you experience a problem with this unit, check the chart below before
contacting us for service.
SYMPTOM
Power does not come on
No Sound
Noise or sound distorted
on AM or FM
SYMPTOM
Incorrect Time
Alarm does not turn on
No display
1. Disconnect the unit from any power sources before cleaning.
2. Keep the unit away from magnetic objects, water or heat sources.
3. Use a clean soft, damp cloth moistened with lukewarm water to clean the
cabinet. Never use chemical cleaners that could damage the finish of the unit.

TROUBLESHOOTING

POSSIBLE CAUSE
GENERAL
AC cord not plugged in
RADIO
Power is not on
VOLUME control at minimum
position
AM-interference from traffic
FM-antenna wire not extended Extend antenna wire
POSSIBLE CAUSE
CLOCK
Clock not set
Battery is inserted incorrectly,
or depleted
Alarm is not set to turn on
Clock is not set
Alarm time is not set
Dimmer is set to Standby Mode Press Dimmer button

CARE AND MAINTENANCE

- 19 -
POSSIBLE SOLUTION
Insert plug firmly into AC outlet
Press the button
Turn the VOLUME control up
Turn the radio for better AM reception
POSSIBLE SOLUTION
Set the clock
Check/replace the battery
Hold the button to set ALARM 1;
Hold the button to set ALARM 2
Set the clock
Set alarm time