Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
-
ATTENTION: Exhaust pipe and carbon filter are not supplied together with the
product and you can contact your local distributor for further information.
5. INSTALLATION INSTRUCTIONS
The cooker hoods must be placed at a distance of 65cm above the cooking surface
of a hob.
Before installation; turn the unit off and unplug it from outlet.
a) Installed as an air extractor
i. Position the hood on the wall (make sure the minimum distance should be 65cm
above the cooking surface of an electric hob or 75cm above the cooking
surface of a gas or dual fuel hob.)
ii. Install the hook on a suitable place once the installation height is fixed, and keep
it in line. The fixed position of the inside chimney bracket is the place of
chimney.
iii. Drill (A,B,C,D,E) holes on marked points by using a Φ8mm drill bit. Push the
plastic wall plugs into the drilled holes. Put the Wall Bracket on the holes A,
B, C. Using the supplied 4x40mm screws; screw Wall Bracket into A,B.C
holes.
Wall plug
Wall bracket
Screw
(4mm x 40mm)
C
B
A
Publicité
Table des Matières
