Corghi ERCO X4300 Série Manuel D'utilisation page 87

16
The solid line outline of the plates indicates the initial position of the plate (rest position),
while the dotted line outline indicates the end position (control activated).
The play detector controls are located on the control torch. The configuration of the torch
is different for the 2 and 6 movement play detectors.
2-MOVEMENT pLAY DETECTOR
Button p1 turns the spot lamp on.
Button p2 actuates movements of the plates from the initial position to the end position
along the XY axis.
Button p3 turns the spot lamp off.
Release button p2 to allow the plates to return automatically to the initial position.
To perform large movements, press and hold button p2. To perform small, pulsed mo-
vements, press p2 briefly.
UK
16_1
p1 p2 p3
Operator' s manual 87