Technical Data - Profi Care PC-BS 3041 Mode D'emploi

Outlet Filter (12)
The appliance is also equipped with an outlet filter.
It is located on the top of the appliance underneath a cover.
1. Push the lock of the cover to the side in order to open it.
2. Remove the cover.
WARNING:
• Before cleaning remove the mains lead from the socket.
• Under no circumstances should you immerse the appliance in
water for cleaning purposes. Otherwise this might result in an
electric shock or fire.
CAUTION:
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
Clean the housing with a soft, dry cloth without additives.
Storage
• Let the appliance cool down completely.
• Wind the cable completely.
• Please insert the hook of the floor nozzle into the parking
assistant on the rear of the appliance.
• If you want to stand the appliance vertically: Attach the
hook of the floor nozzle to the parking aid on the bottom
of the appliance.
Troubleshooting
Problem Possible Cause
The The appliance is
appliance not connected to
does not mains power.
work.
Weak The suction power
suction is set too low.
power.
The dust bag
is full.
The filters are
dirty.
PC-BS3041_IM
Cleaning
Remedy
Check the connection to
the mains.
Check the position of the
control.
Renew the dust bag.
Clean the filters as
described under "Main-
tenance".
CAUTION:
Restart operation only
with dry filters.
3. Remove the filter insert and clean it as described above.
4. Once dried completely, reinstall the filter insert.
5. Closing the cover: Position the cover with the 3 snap
tabs first. Then push the fastener to the side to snap the
cover.
Problem Possible Cause
Weak There is a foreign
suction body in the suction
power. tube or the nozzle.

Technical Data

Model:..................................................................PC-BS 3041
Power supply:..................................... 220 - 240 V~, 50 / 60 Hz
Power consumption: .....................................................600 W
Protection class: ...................................................................
Net weight: ....................................................... approx. 5.0 kg
Dust filter bag: .................................SSB 101 / Swirl® Y 101®
Swirl®, Y 101® is a registered trademark of a company of
the Melitta Group which is not associated with the company
Clatronic International GmbH.
The right to make technical and design modifications in
the course of continuous product development remains
reserved.
Notice of Directive Conformity
The appliance meets the European standards and direc-
tives in the current version at delivery:
• Low Voltage Directive (LVD) 2014 / 35 / EU
• Electromagnetic Compatibility (EMC) Legislation
Directive 2014 / 30 / EU
• RoHS-Directive 2011 / 65 / EU
• Ecodesign-Directive (ErP) 2009 / 125 / EG
• Ecodesign Requirements for Vacuum Cleaners COM-
MISSION REGULATION (EU) No. 666 / 2013
Remedy
Check the accessories
for foreign bodies.
33
06.03.19