First Time Use - Petromax Loki2 Mode D'emploi

Assembly
DE
1. First, take out all parts from inside the Tent Oven corpus.
EN
2. Unfold the support legs and fasten each with the spring pins.
FR
3. Attach the five-part flue to the corpus of the Loki2. Insert the flue with damper directly on the Tent
Oven corpus so that it is pointing upwards. To ensure that the smoke can escape correctly through
the flue, all flue parts must be connected correctly and tightly.
4. If you use the Petromax Loki2 in a tent, install the suitable Tent kit and a Spark Arrestor. Ideally,
attach the Tent kit as high as possible within the tent, so that the poses heat creates as little strain
as possible to the tent material.
5. Finally, attach the ember tray directly underneath the oven door. If you open the oven door during
use, hot embers can be caught by the ember tray.

First time use

Caution! The first lighting of the Petromax Loki2 should be performed outdoors and
not in a tent, for smoke can develop.
Lighting the Loki2
• Place the Petromax Loki2 on an even, steady surface.
• When placing the Tent Oven, make sure the oven door can be opened and closed easily.
• If you wish to use a firelighter, place it in the combustion chamber and then stack your firewood.
We recommend only solid firelighters, such as the Petromax Fire Kit. If you do not have a special
firelighter start the fire with an old newspaper and thinly chopped wood.
• Optimal fuel for your Petromax Loki2 are brushwood, dry twigs, well seasoned firewood etc. Do
not use damp wood!
• Open the door only to add fuel. Otherwise keep it closed. To fan the fire, regulate the air supply by
moving the air slider on the oven door.
• Add fuel when needed and thus regulate the heat of the fire in the Tent Oven. Adding small firewood
is particularly easy with the Petromax Lid Lifter for Dutch Ovens if used as a poker.
10