Bluetooth; Bluetooth Connection - Pioneer MVH-S312BT Mode D'emploi

*2 When you use the fast forward or reverse function while playing a VBR file, the playback time may
be not correct.
About MIXTRAX (USB/iPhone only)
The MIXTRAX function creates a non-stop mix of your music library. For details on
MIXTRAX settings, see page 28.
NOTES
• iPhone needs to be connected with Pioneer Smart Sync via USB for using this function (page 17).
• Depending on the file/song, sound effects may not be available.
1
Press 3/MIX to turn MIXTRAX on/off.

Bluetooth

Bluetooth connection

Important
If ten or more Bluetooth devices (e.g. a phone and separate audio player) are connected, they may not
work properly.
TIP
The next connection to the unit is performed automatically if the Bluetooth device has been connected
previously in the following steps.
1
Turn on the Bluetooth function of the device.
If you make a Bluetooth connection from the device, proceed to step 4.
2
Press to display the [ADD DEVICE] setting.
The unit starts to search for available devices, then displays them in the device list.
• To cancel searching, press the M.C. dial.
• If the desired device is not in the list, select [RE-SEARCH].
• If there is no device available, [NOT FOUND] appears in the display.
• If there is already a connected device, the phone menu appears by pressing
3
Turn the M.C. dial to select a device from the device list, then press to confirm.
Press and hold the M.C. dial to switch the displayed device information between the
Bluetooth device address and device name.
If you make a Bluetooth connection from the unit, proceed to step 5.
4
Select the unit name shown in the device display.
- 10 -
.