Listening To The Radio - AEG MRC 4143 Mode D'emploi

English
46
CAUTION:
• Batteries are not to be disposed of together with domestic wastes. Dispose of the
used batteries at the relevant collection bin or at your dealer' s .
• The terminals may not be short-circuited.
Switching the device on/ off
Switching on: Press the ON/OFF / AM/FM button.
Switching off: Press the ON/OFF / AM/FM button for approx. 3 seconds.
Time
Setting the time (in time mode)
1. If the time display does not flash, hold down the SET/PRE/M+ button for approx.
2 seconds. The time display starts to flash.
2. Set the time with the HOUR/TU- and the MIN/TU+ button.
3. Confirm the setting with the SET/PRE/M+ button.
NOTE:
If you do not press any button within 3 seconds, the settings are adopted automatically.

Listening to the radio

Scanning stations
1. Press the ON/OFF / AM/FM button to switch on the radio.
2. Select the required frequency band by repeatedly pressing the ON/OFF / AM/FM but-
ton. A dot lights up on the display next to FM (frequency modulation) or AM (medium
wave).
3. Control the volume with the AL2/VOL+ or the AL1/VOL- button.
4. If you press the MIN/TU+ or the HOUR/TU- button briefly, the device will scan to the
next radio station.
NOTE:
If there is interference on the received station, try to improve the reception by changing
the position and by unwinding or winding the antenna.
Presetting radio stations
1. Search for a station as described in "Scanning stations".