BabyGo Motion Instructions De Montage page 19

BabyGO
6. Slide each harness strap over the child's shoulders. Insert the buckle tongues into the buckle
until you hear a noticeable "click". Pull up on the harness strap to ensure the buckle tongues
are engaged (fig.6).
7. Gently pull the harness adjust straps towards you to tighten the harness for a comfortable
and snug fit around the child (fig.7).
8. The harness straps must be snug against the child. A snug strap should not allow any slack.
It lies in a relatively straight line without sagging and it does not press on the child's flesh or
push the child's body into an unnatural position. Check the harness straps near the shoulders
for slack and adjust as needed (fig.8). Press the red buckle release and remove the buckle,
then take out the child.
Group II+III (for children 15 – 25 kg) with a backrest
5. Place the child in the restraint (fig.5).
ASSEMBLY INSTRUCTION
Motion | Sportline
FreeMove | GoSafe
BabyGO • www.babygo.eu
19