Care And Cleaning - Alpina SF-5011 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 8
- Do not use the appliance for any other purpose than its intended use.
- The fan must not be used if the guards are not fastened according to instructions.
- When the power cord is damaged, it must be replaced by the manufacturer or its -service
agent or a similarly qualified person in order to avoid a hazard.
- Do not use your appliance with an extension cord unless it has been checked and tested by a
qualified electrician or electrical supplier.
- The appliance is not intended for use by young children or infirm persons unless they have
been adequately supervised by a responsible person to ensure that they can use the
appliance safely.
- Young children or infirm persons should be supervised to ensure that they do not play with
the appliance.
3. ASSEMBLY OF YOUR FLOOR FAN
Your Floor Fan has been boxed assembled, remove all packaging material for immediate use.
4. OPERATION OF YOUR FLOOR FAN
Loosen the adjustment knob to tilt the Floor Fan to the desired angle.
Tighten it once the desired angle is reached.
Piano Swith"1" for a low speed, "2" for a medium speed and "3" for a high
speed, and "0" for off.

5. CARE AND CLEANING

Always disconnect electrical appliances before cleaning them.
To clean the blade and grille assembly, first remove the safety grille, unscrew the locknut and
remove the blade from the Floor Fan. Wipe them clean with a slightly damp sponge.
Clean the motor housing and body assembly with a clean, damp cloth and wipe dry.
Never spray with liquids or submerge the Floor Fan in water or any other liquid.
- 3 -
ENGLISH

Publicité

Table des Matières
loading

Table des Matières