Duux DXCF14 Mode D'emploi page 5

Disassemble table fan: Disconnect the motor
7
from the base by lifting the fan and squeezing
the locking mechanism on the bottom of the
base. Simultaneously pull the motor from the
base.
Motor
Base
Assemble standing fan: To extend the height of
8
the fan, insert the extension tube by fitting the
two metal pins of the extension tube connector
to the designated holes in the base connector.
Similarly match the metal pins of motor
connector to the top of the extension tube.
8
Disassemble standing fan: Disconnect the
9
motor from the extension tube by squeezing
the locking mechanism at the top of the tube.
Pull the motor away from the extension tube
at the same time. Disconnect the extension
tube by lifting the fan and squeezing the
locking mechanism on the bottom of the base.
Simultaneously pull the motor from the base.
9