Cleaning And Storage; Product Data - MAXXMEE TS-23343 Mode D'emploi

EN
ATTACHING THE
CLEANING CLOTH
1. Pull the cleaning cloth with the mid-
dle loop over the hook in the middle
of the cleaning foot.
2. Then pull the four outer loops over
the small hooks on the outside of the
cleaning foot.
USE
1. Pour water up to the MAX marking in
the bucket (A).
F
G
3. Pull the mop out of the long rail,
place it in the short rail (F) and press
down again. The mop is stopped
halfway up and the cleaning cloth is
wrung out by the mechanism in the
mop head.
4. Pull the mop out of the short rail and
mop the fl oor in the usual way.
5. Repeat step 2 and 3 as required.
8
2. Place the mop in
the long rail (G)
and press down.
This triggers
mechanism
the mop head
which washes the
cleaning cloth
and wets it in the
water at the same
time.

CLEANING AND STORAGE

• Detach the cleaning cloth from the
cleaning foot and wash it in the wash-
ing machine. Follow the instructions
on the washing label! Do not use any
fabric softener as this can reduce the
absorbency of the cleaning cloth.
• If necessary, wipe the mop with a
damp cloth and a little mild cleaning
agent if required. Do not use any
caustic or abrasive cleaning agents
or cleaning pads to clean the prod-
uct!
• Allow all parts to dry thoroughly
before they are stored away.
• Store the mop and the cleaning cloth
in a clean, dry, frost-free place that
a
is not accessible to children and
in
animals.

PRODUCT DATA

Article number:
Model number:
Capacity of bucket: 5 l
ID of operating
instructions:
DISPOSAL
Dispose of the packaging material
in an environmentally friendly
manner so that it can be recycled.
The product should also be
disposed of in an environmen-
tally friendly way if it is no longer
going to be used.
00809
TS-23343
Z 00809 M DS V1
0720 uh