Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
fi nal assembly
To nish installing your new bracket, present the screen to the wall plate. Place the top notch of the xed
arms on the back of the screen in the top runner of the wall plate. Then tilt the TV downwards. You should
hear a distinct click, signifying that the TV is in place and rmly held.
Remember to leave a cord of suf cient length to allow you to remove the TV from the
bracket later.
18
V.3.0
final assembly
Plaque support
Cords
When the TV is correctly positioned, you can fold
up the two cords to form a loop.
If they are still visible when folded up, cut the
ends with scissors before folding up.
9
V.3.0
fi nal assembly
Publicité
Table des Matières
