Operating instructions
BEFORE INSTALLING THIS PRODUCT, IT IS IMPORTANT TO READ AND UNDERSTAND THE
INSTALLATION INSTRUCTIONS COMPLETELY IN ORDER TO AVOID PHYSICAL INJURIES AND
MATERIAL DAMAGE. KEEP THESE INSTALLATION INSTRUCTIONS IN A PLACE WHICH IS EASILY
ACCESSIBLE SO YOU CAN CONSULT THEM AT A LATER DATE.
The safety instructions must be followed throughout the installation of this product. User safety
equipment and suitable tools for installation in order to avoid physical injury.
This appliance is intended for domestic use only
•
inside a dwelling place. Only use the appliance as
indicated in these operating instructions.
If the product were to be sold or given to another
•
person, make sure that the operating instructions
are passed on with it and that no parts are defective.
This wall mount bracket is able to support a
•
maximum load of 45 kg for screens with a diagonal
measurement of 32" (82 cm) to 75" (190 cm)
maximum. Ensure that the wall structure can
support such a load.
The weight of the screen must not exceed the
•
maximum load capacity of the bracket.
It is essential that you follow a correct installation
•
procedure. This must be carried out by two
quali ed people. Non-compliance with the installation
instructions may lead to severe physical injury, linked
to falling or incorrect handling of the screen.
Do not install the bracket on a structure which is
•
subject to vibrations, movement or which may be
subject to impacts. Non-compliance may lead to
the screen being damaged or the surface of the
bracket being damaged.
Do not install the bracket in a place of passage in
•
order to avoid knocks and injuries (above a bed, a
chair, a door or in a corridor...).
Do not install the bracket near heating, a replace,
•
direct sunlight, air-conditioning or other sources of
direct heat.
Non-compliance may lead to the screen being
•
damaged and may increase the risk of re.
14
V.3.0
Operating instructions
Do not install the bracket in a very damp environment.
•
One month after installation, check that all the
•
screws are tight and that the wall plate has been
correctly attached to the wall. Stability may be
reduced once the TV is attached to the bracket.
Please note: Please check that no electric cables,
•
gas or water pipes are behind the wall onto which
you wish to x your bracket!
Stability may be reduced if the bracket is attached
•
to an item of furniture.
Check the position of the electric cables when you
•
install or handle the wall bracket, in order to avoid
any pinching or deterioration of the cables.
The screw xings supplied with this wall bracket
•
are intended exclusively for xing to a wall made
up of solid bricks or concrete.
For installation on any other medium (wood, hollow
•
bricks, plasterboard surfaces, steel...) please
contact an approved professional installer, and use
the appropriate equipment.
Before beginning installation, please check the
•
composition of your wall. Do not install the bracket
on old or badly sealed brickwork, on a plasterboard
surface or wood panelling.
Keep children away from the installation and
•
ensure that they cannot play with the appliance
subsequently.
The
packaging
material
•
polystyrene) can be dangerous for children: there
is a risk of suffocation. Do not leave packaging
material within reach of children!
(packaging
paper,
V.3.0
Operating instructions
5