Channel Equalization; Program Reverse Switch; Ecler Faders; Eternal Crossfader - Ecler HAK360 Manuel D'utilisation

4.4. Channel equalization

The tone controls for each of the two main channels provide a +10/­30dB boost/cut
at high and low frequencies and +10/-25dB at the mid range. This great attenuation range is
specially indicated for the famous "kill" effect, which cuts the band over which it performs.
Following indications of experienced DJs, we have arrayed the control-knobs of the EQ section
horizontally. This placement enables a more comfortable area to work with. Additionally, the
HAK360 offers a dedicated balance control over each channel.
MICRO channel has two band (bass, treble) tone control.
ATTENTION: Use equalization carefully, by boosting too much the low frequency
range, you can induce an excessive displacement of the speakers membrane.

4.5. Program Reverse Switch

Program Reverse Switch activation (22) drives sound sources connected to INPUT 1
to INPUT 2 and vice versa but without changing GAIN adjustments.

4.6. ECLER Faders

The HAK360 uses a new generation of ECLER faders featuring an improved precision
and very smooth movement, a very fast cut-in-time, and extra long life performance tested up
to 4.000.000 operations when combined to the ECLER VCA system (VCA=Voltage Controlled
Amplifier).
Thanks to the VCA concept, it's possible to modify the gain/attenuation behaviour of
faders. The HAK360 provides this "Curve Adjustment" feature, enabling you to control the
fade-in and fade-out characteristics of each channel faders. Two knobs Shape (44) at the
housings front let you adjust the response curve from soft to hard independently. Each fader
channel also features REVERSE function, through the so-called "Hamster Switch" which
reverses (43) the crossfader normal direction. Depending on the chosen "fader direction", you
can perform crossfader "cuts" and "transforms" by moving the faders in the same direction.
To replace the genuine ECLER Faders, please refer to Sec. 4.9

4.7. ETERNAL Crossfader

The ECLER ETERNAL Crossfader is an inductive fade technology based on a magnetic
control. An extremely light aluminium screen (0,5 gr.) cuts the flux lines of a magnetic field
created between two sets of coils. This electromagnetic modulation controls an assigned
Voltage Controlled Amplifier that modifies the gain/attenuation of the signal. The contactless
technology is combined with a custom high quality glides mechanism to offer a very smooth
touch and succeed the most accurate Crossfader system !
8