Storage
When transporting and storing the Protocol Converter, the following
environmental requirements should not be exceeded:
Preparation for Installation
The Protocol Converter is shipped inside a special protective case; in
case of damage occurred during the transport, please contact the
local selling centre. Do not throw the case in the environment. The
material is totally recyclable in accordance with the directive CEE
85/399 for the environmental protection.
Installation
Do not install or use the controller in an environment exposed to
atmospheric agents (rain, snow, ice), dust, aggressive gases, or in
explosive environments or those with a high fire risk. During
operation, the following environmental conditions must be respected:
Protocol Converter RS232-485 User Manual / 87-900-974-01 (E)
temperature: from -20° to +70 °C
relative humidity: 0 - 95% (non-condensing)
temperature: from + 5 °C to +40 °C
relative humidity: 0 - 95% (non-condensing)
Instructions for Use
Storage
129/146
17