Starmix airstar STHH 2400 Série Mode D'emploi page 8

Caution!
Drill auxiliary bores into the covers (x) of the attachment points to avoid damage to the wall holder when lifting out of the
covers.
11.2 Lift the covers (x) out of the attachment points of the wall holder at the auxiliary bores by means of a drift.
11.3 Remove the screws together with the washers from the wall holder and detach the height adjustment from the wall.
11.4 Pinch off the connector cable of the height adjustment.
Caution!
Place the height adjustment onto a soft cloth to avoid scratches.
8
x
e
g
h
x
a
c
i
b
d
f