Height Adjustment - Starmix airstar STHH 2400 Série Mode D'emploi

Height adjustment

1. Abbreviations and units
RCD Residual Current Device
Residual current circuit breaker
(RCCB)
Conversion 1 mm = 0.33937 inches
1 inch = 25.4 mm
All lengths in the figures are in mm.
2. Signs and symbols
Warning!
Non-adherence may lead to danger to life or personal
injury.
Caution!
Non-adherence may lead to material damage.
Important!
Non-adherence may lead to malfunction.
Useful information for handling the product
3. Guarantee
Guarantee is given in accordance with the general delivery
and business conditions.
Use original replacement parts only!
4. Important notes
• Children or persons with disability or insufficient
experience may only use the device under supervision.
• Assembly, start-up and maintenance may only be carried
out by a qualified person, in accordance with the
supplied operating manual, legal provisions and
generally accepted technical procedures.
• The technical attachment requirements of the local
power supply company shall be adhered to.
• Subject to modifications
5. Application
Height adjustment for hairdryers for the application in semi-
public and public-industrial areas
Continuously adjustable via constant load self-recoiling
spring, guide rail made of anodized special aluminum, with
4 mm thick, fully adhered plate glass and covered, vandal-
proof cable guide.
6. Technical specifications
Supply voltage: 230 V~/50 Hz
Protection class: I
Height adjustment: 600 mm, continuous
6
7. Scope of delivery
1 x height adjustment
1 x assembly set
1 x operating manual
8. Dimensions
9. Assembly
Warning!
• Mount the height adjustment for hairdryers outside of the
reach of persons using a bath tube or a shower.
• Connect the height adjustment to the ground conductor
system.
• The electrical connection shall be fused with a residual
current device (RCD) for a maximum nominal residual current
of 30mA