Range Of Use; Technical Data - TIP DrainPress 3200/24 Set Mode D'emploi

Any nonobservance of these instructions involves the danger of bodily harm to
people and/or damage to property.
Any nonobservance of this instruction bears the risk of an electrical shock which may
cause damage to persons or property.
Please inspect the device for damage occurred during transportation. In case of damage, the retailer
has to be informed immediately, at the latest within 8 days after the date of purchase.

2. Range of use

These for special applications developed submersible multistage pumps from T.I.P. are highly efficient
electrical pumps for discharging clear, clean or moderately dirty water containing solids up to the
maximum size specified in the technical details. These high-quality products with their convincing
performance data were developed for the multiple purposes involved with irrigation, draining and
pumping liquids from one place to another.
The typical ranges of application of DrainPress pumps include: draining of pools, basins and storage
containers as well as the operation of irrigation systems and draining from rooms (thanks to low
suction function). This pump is suitable for stationary or temporary installations.
This product is intended for private use in the home area and not for commercial or industrial purposes
or for continuous circulating.
The device is not suitable for use in swimming pools when people or animals are in the water or for
installation in public water mains.
The pump is not suitable for use in table-top fountains, aquariums or similar ranges of use.
The pump is not suited to discharge saltwater, faeces, inflammable, etching,
explosive or other hazardous liquids. Please observe the max. temperature of the
liquids to be discharged stated in the technical data.
Inside the pump, lubricants are used which may contaminate the liquids being
discharged in case of any improper operation or damage of the device. The
lubricants used are biologically degradable and non-hazardous to health.

3. Technical Data

Model
Mains voltage / frequency
Nominal performance
Protection type
Pressure port
Max. flow rate (Q )
1)
max
Max. pressure
Max. delivery height (H )
max
Max. submersion depth 
Max. size of the solids being pumped
Max. fluid temperature (T
max
Max. cut-in frequency in one hour
Length of connection cable
Cable type
Weight (net)
Min. self-priming level (A)
2)
Min. suction level (B)
2)
Cut-in level (C) 2)
Cut-out level (D) 2)
Dimensions (L x D x H)
Item no.
1) The values were determined with free, unreduced outlet.
The values between brackets refer to the illustrations given at the end of these operating instructions.
2)
1)
)
DrainPress 3200/24
230 V~ / 50 Hz
400 Watt
IPX8
26,44 mm (¾ ") male
3.200 l/h
2,4 bar
24 m
7 m
2 mm
35 °C
30, evenly distributed
10 m
H05RN-F
~ 4.7 kg
45 mm / 40 mm
4 mm / 1 mm
600 mm - 250 mm
60 mm - 170 mm
16 x 15,5 x 30,0 cm
30181
2
11