Toshiba PDR-M11 Mode D'emploi page 42

How to Press the Shutter Button (continued)
Memo
• If the shutter button is pressed all the way down, photographs cannot be taken until AF and AE are
locked.
• The image in the LCD monitor sometimes darkens from the time that the shutter button is pressed down
halfway until the image becomes focused.
• To focus or expose a position outside the center of the screen frame, move the subject you are taking to
the center of the screen frame, and press down the shutter button halfway and hold it until the camera
beeps. Now, with the shutter button held down, return to the original picture that you composed and
press the shutter button down fully. Moving the camera as you press the shutter button will result in a
blurred image.
• The PDR-M11 uses an accurate auto focus mechanism. However, the PDR-M11 may have difficulty
focusing or not be able to focus at all for subjects and situations such as the following:
- Subjects moving at high speed
- Very shiny subjects such as a mirror or car
body
- Extremely low contrast subjects
- Subjects that have low contrast and merge
into the background (such as white walls or
subjects dressed in the same color as the
background)
• If the image cannot be focused, the focus is automatically fixed to infinity. When the flash is necessary
at this time, it is simultaneously fixed to illuminate objects three feet (0.9 meters) away.
36-50 PDRM11-E
- 38 -
38
- When the subject is distant and dark
- When there are objects in front of or behind the
subject (such as an animal in a cage or a person
in front of a tree)
- Subjects with little reflection, such as a hair or fur
- Subjects with no solidity, such as smoke or flames
- Subjects viewed through glass
01.6.28, 10:17 AM