Operating - Medisana Ultrabreeze Mode D'emploi

60050_GA_Ultrabreeze_West_NEUSS.qxd:Luftbefeuchter
GB

3 Operating

3.1
Getting
started
3.2
Filling and
emptying the
water tank
3.3
Addition of
aroma essence
3.4
Switching
the personal
humidifier on
and off / power
setting 1 and 2
12
CAUTION
Make sure that you use your MEDISANA Intensive Personal
Humidifier on a safe and even surface that is not sensitive to
moisture. There may be some condensation/accumulation of
moisture, especially when using the unit with hard water /
aroma essence.
Rinse the water tank and the nebu-
lizer attachment once thoroughly with
fresh drinking water before using for
the first time. Remove the water tank
from the device, turn it around
and unscrew the tank lid. Fill up the
tank with a maximum of 1.3 litres of
fresh drinking water or demineralised
water.
Screw on the tank lid again tightly and
wipe away any drops on the tank.
Make sure the lid seal is on properly.
Place the water tank on the device with the filler opening facing down-
wards.
Do not move the unit when the water chamber is full, as the tilting motion can
cause the water level to rise above the nebulizer membrane, preventing it from
working. When the unit is switched off, you can remove the nebulizer attach-
ment and use a cloth to remove any excess water.
Dispose of the leftover water after use and rinse out the tank with fresh
drinking water. Before using again, fill the tank with fresh drinking water or
demineralised water.
When you have switched off the unit and do not intend to use it for an exten-
ded period of time, remove and empty the water tank and the device.
You can use the device with a water soluble aroma essence. Put about 10
drops of the essence into the 1.3 litre full water tank.
Please note that a film may form through adding the essence! Sie können die
You can obtain aroma essences with a variety of fragrances from MEDISANA.
Fit the nebulizer attachment
Connect the mains adaptor lead to the socket
the mains outlet.
After briefly pressing the ON/OFF switch
water and the fan works at a higher intensity (power setting 1). The higher fan
output provides the ambient air with more humidity. The operating symbol for
the personal humidifier
difier is switched on with the ON/OFF button, the pre-heating for destroying
germs and bacteria also comes on. Press the ON/OFF button
and the device operates at a reduced intensity (power setting 2). The operating
14.09.2010
onto the unit.
and plug the adaptor into
, the device starts nebulizing the
appears in the display . Once the personal humi-
17:41 Uhr Seite 12
a second time