Amprobe DM-II PLUS Mode D'emploi page 23

Power measurement (cosϕ: 0.5c[positive] – 0.5i[negative])
Value
Active power
Reactive power
Apparent power
Active energy
Reactive energy
Cosϕ Measurement
Cosϕ
0 to 0.20
0.21 to 0.50
0.51 to 0.80
Measurement of Harmonics
Voltage
Range
DC – 25h
26h – 33h
34h – 49h
The voltage harmonics will be null under the following threshold:
- DC: if <1V or <2% of 1st harmonic
- 1st harmonic: if <2V
- 2nd to 49th: if <1V or <2% 1st harmonic
Current
Range
DC – 25h
26h – 33h
34h – 49h
The current harmonics will be null under the following threshold:
- DC: if <2% of 1st harmonic or < 0.2% of clamp full scale
- 1st harmonic: if < 0.2% of clamp full scale
- 2nd to 49th: if <2% 1st harmonic or < 0.2% of clamp full scale
Setting the FLEX option the DC component will be ignored.
Ranges
0 – 999.9W
1kW – 999.9kW
1MW – 999.9MW
0 – 999.9VAR
1kVAR – 999.9kVAR
1MVAR – 999.9MVAR
0 – 999.9VA
1kVA – 999.9kVA
1MVA – 999.9MVA
0 – 999.9Wh
1kWh – 999.9kWh
1MWh – 999.9MWh
0 – 999.9VARh
1kVARh – 999.9kVARh
1MVARh – 999.9MVARh
Resolution
0.01
Accuracy
±(5.0%+2digit)
±(10.0%+2digit)
±(15.0%+2digit)
Accuracy
±(5.0%+2digit)
±(10.0%+2digit)
±(15.0%+2digit)
Accuracy
±(1.5%+2digit)
Accuracy (expressed in degrees)
21
Resolution
0.1W
0.1kW
0.1MW
0.1VAR
0.1kVAR
0.1MVAR
0.1VA
0.1kVA
0.1MVA
0.1Wh
0.1kWh
0.1MWh
0.1VARh
0.1kVARh
0.1MVARh
0.6
0.7
1
Resolution
0.1V
Resolution
0.1A