NiceHome RC200 Instructions Et Avertissements Pour L'installation Et L'utilisation page 28

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Mode 2 (advanced memorization)
In this mode, each of the 4 available commands can be associated to a trans-
mitter key, as shown in Table [C].
Table [C]
Commands available for memorization Mode 2
Command
1
On-Off
2
Man Present
3
Timer 1
4
Timer 2
In this mode, the memorization procedure is performed separately for each
single transmitter key; this means that 2 keys on the same transmitter can be
memorized for two commands to the same radio receiver, or to command
different receivers as illustrated in the example below:
Example of memorization in Mode 2
Key 1
On-Off on
RC200 no. 1
Key 2
Key 3
Key 4
8 – English
Description
The first command switches on the unit, the
next one switches it off, and so on
When the key is pressed the relay contact
closes. When the key is released the relay
contact opens
The contact remains closed for a length of time
ranging from 1 sec to 9 hours (programmable
as shown in Table [G])
The contact remains closed for a length of time
ranging from 1 sec to 9 hours (programmable as
shown in Table [G])
Timer1 on
RC200 no. 2
Timer2 on
RC200 no. 3
Man Present on
RC200 no. 3

Publicité

Table des Matières
loading

Table des Matières