Product Description And Applications - NiceHome RC200 Instructions Et Avertissements Pour L'installation Et L'utilisation

• Before proceeding with the installation, make sure the product is suit-
able for its intended use. Pay special attention to the data provided in the
"Technical Characteristics" chapter. NICE disclaims liability for any dam-
age resulting from uses of the product other than those described in this
manual.
• Protect the product's internal components from contact with water and
other polluting substances. Keep it away from heat sources and do not
expose it to open flames. If any of these conditions occur, stop using it
immediately and call NICE customer service.
• Disconnect the power supply before proceeding with the installation opera-
tions.
• The packaging materials must be disposed of in compliance with the regu-
lations locally in force.

PRODUCT DESCRIPTION AND APPLICATIONS

The RC200 radio receiver, used in combination with the ECCO5... and
STX100 transmitters, is suitable for the remote control of single-phase equip-
ment powered by the mains voltage, with up to 500W power.
The possible commands are On/Off, "Man Present", Timer 1 and Timer 2.
The radio receiver operates at a frequency of 433.92 MHz and can memorize
up to 30 ECCO5... and STX100 transmitters.
WARNINGS
— STEP 1 —
— STEP 2 —
ECCO5
STX100
English – 1