Explanation Of The Symbols; Safety Instructions - Batavia MAXXHEAT BT–HG004 Mode D'emploi

.
Dear customers,
Instruction manuals provide valuable hints for
using your new device. They enable you to use
all functions, and they help you avoid misunder-
standings and prevent damage.
Please take the time to read this manual care-
fully and keep it for future reference.
Intended for household and similar purposes.
This heat gun is a 4-in-1 appliance
1. Traditional heat gun
2. Weed killer
3. Specific weed killer
4. BBQ / Firelighter
Use this appliance for the intended purposes
only! Other forms of use can lead to injuries or
accidents!

1 Explanation of the symbols

WARNING! Read the user manual.
Denotes risk of personal injury, loss of
life or damage to the tool in case of
non-observance of the instructions in
this manual.
Indicates electrical shock hazard.
Do not expose to rain!
There is a fire hazard.
Remove plug from the mains
immediately if the cable is damaged or
cut.
Caution, hot surface!
Risk of burns due to hot surfaces! Do
not touch!
Always remove the plug from the
socket, when appliance is not in use,
when changing nozzles or when
servicing or cleaning.
Electric power tool, protection class II.
This sign symbolises that this unit
corresponds to Protection Class II.
This means that the unit is equipped
with either reinforced or double
insulation between the mains circuit
6
7063006-Maxxheat-Basic-MA-1712-21.indb 6
and output voltage or metal housing
respectively.
CE stands for "Conformité
Européenne", which means "In
accordance with EU Regulations".
With the CE marking, the manufacturer
confirms that this Electric tool
complies with the applicable European
directives.
Voluntary test seal „Safety
Tested".
Do not dispose the electric power tool
with domestic refuse!

2 Safety instructions

This appliance should not be
used by persons (including chil-
dren) with reduced physical,
sensory or mental capabilities, or
lack of experience or
knowledge.
Children shall not play with the
appliance.
Disconnect the unit from the
power supply and allow it to cool
before cleaning, maintenance or
storage.
Disconnect the unit from the
power supply and allow it to cool
before cleaning, maintenance or
storage. Protect electrical parts
against moisture. Do not
immerse in water or other liquids
during cleaning or operation to
avoid electric shock. Never hold
the appliance under running
water. Please follow the instruc-
tions in this manual.
04-01-18 11:05