Publicité
Les langues disponibles
Les langues disponibles
Cyborg_V1_Mouse_manual.qxd
28/05/2009
CYBORG V.1 MOUSE
System Compatibility
PC running Windows XP/XP64/Vista/Windows 7/Mac OS X
Connecting the mouse
With your PC on, insert the Mouse's USB plug into one of your PC's USB sockets.
Troubleshooting
Mouse not detected
Make sure the mouse cable is plugged into the correct USB port. A
USB mouse can only connect to a USB port.
Make sure your USB port is properly configured. Refer to your
computer documentation for the correct port configuration.
You may have other system devices (eg, a modem card) that conflict
with the mouse. Check the IRQ/address settings of these devices for
conflicts, and change the setting as required. Refer to your computer
documentation to make these changes.
Determine whether the problem is related to the mouse or the system,
try the mouse on a second system or a different mouse on your
current system.
Important Information
Some experts believe that using any mouse or trackball may cause
serious injury to hands, wrists, arms, neck, or back. If you feel pain, numbness, or weakness in
these areas, please consult a qualified health professional immediately.
To reduce the risk of injury, please follow these precautions:
•
Take frequent breaks, get up and walk around several times every hour.
•
Vary your tasks throughout the day.
•
Keep your shoulders relaxed with your elbows at your side. Position your keyboard and mouse
so you do not have to reach.
•
Adjust your chair and keyboard so your upper arms and wrists are straight.
•
Avoid resting your wrists on sharp edges.
12:45
Page 2
c
a
b
a DPI switch toggles
between 800dpi and
1600dpi resolution
b Internet browser
forward
c Internet browser back
Technical Support
Can't get started - don't worry, we're here to help you!
Nearly all the products that are returned to us as faulty are not faulty at all - they have just not
been installed properly.
If you experience any difficulty with this product, please first visit our website www.saitek.com. The
technical support area will provide you with all the information you need to get the most out of your
product and should solve any problems you might have.
If you do not have access to the internet, or if the website cannot answer your question, please
contact your local Saitek Technical Support Team. We aim to offer quick, comprehensive and
thorough technical support to all our users so, before you call, please make sure you have all the
relevant information at hand.
To find your local Saitek Technical Support Center, please see the separate Technical Support
Center sheet that came packaged with this product.
Information for Customers in the United States
FCC Compliance and Advisory Statement
Warning: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1
This device may not cause harmful interference, and;
2
This device must accept any interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
Publicité
