Cleaning & Maintenance - Brandt FC-40MW Manuel D'instructions

4/ CLEANING & MAINTENANCE
Unplug and allow the oven to cool completely before cleaning.
When cleaning, use a soft cloth (or sponge) and neutral cleaner on the interior and
exterior surfaces of the oven, tray, rack, and rotisserie fork. Then rinse with clean water.
Do not use a hard brush or any others cleaners to avoid scratching or damaging the
interior surface of the oven, tray, wire rack and the rotisserie fork.
Do not use toxic or abrasive cleaners such as gasoline, polishing powder, solvent.
For safety reasons if the power cable is damaged, it must be replaced by the manufacturer
or its servicing company or a qualified person.
FagorBrandt SAS – Management Company - SAS with a capital of 20,000,000 euros - Head Office: 7 rue Henri Becquerel -
92500 Rueil-Malmaison - RCS Nanterre 440 303 196
16