Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Temperature adjustment
Operating Instructions
1:
The key is for unlock and temp. –increasing set key for the storage temp. in the
cabinet. In the non-locking state, the temp. will increase1℃ by each click, the highest
setting is 18℃
2:
The key is for lock and temp. –decreasing set key for the storage temp. in the
cabinet. In the non-locking state, the temp. will decrease 1℃ by each click, the lowest
setting is 5℃
3:
The key is for the lamp. In the non-locked state, click it, light on, click again, light
off, followed by recycling.
4:
The key is the conversion button for Fahrenheit and Celsius temperature. The
factory default is Celsius, in a non-locked state, it will convert to Fahrenheit by short
click, click again, it will be Celsius, followed by recycling.
5: When it powered on the first time, the digital screen "Set" and "Display" lit
simultaneously, the desired storage temp. in the left display window can be set by
pressing the keys
, it displays the actual environment temperature in the right display
window. After setting ,the system defaults that the measured temperature display window off
after 30s, if the measured temperature needs to be queried, it can be displayed by pressing any
key, then It enter the default state after 30s automatically.
6:
is the indication that the machine enters low temperature starting status. When there is
no device for heating start in low-temperature, this item is meaningless.
7:
is the instruction for the operation of the compressor. When the compressor
starts to work, the light on; when the compressor stops working, the lights off.
15
Publicité
Chapitres
Table des Matières
