Failure Analysis - La Sommeliere CVD122B Notice D'utilisation

Failure analysis

The compressor does not shut automatically.
1. Whether the objects put in the chamber at a time are too many? (If the objects put in the
chamber at a time are too many, the compressor will run continuously for several hours and
return to the shutdown state after these objects are cool enough.)
2. Whether the times of opening the door of the Wine Cooler are too frequent or too long?
The noise is high.
1. Whether the Wine Cooler is located on a stable level surface?
2. Whether the Wine Cooler is placed placidly?
3. Whether the Wine Cooler is contacted with surrounding objects?
4. Whether the voltage is stable?
5. Whether there are sources of resonant excitation nearby the Wine Cooler?
The refrigeration is bad.
1. Whether the temperature is adjusted to be the proper one?
2. Whether the Wine Cooler is close to heat sources or directly exposed to sunshine?
3.Whether there is enough room surround the Wine Cooler?
4. Whether too many or too heat objects are placed in?
5. Whether the times of opening the door are too frequent or too long?
Do not refrigerate completely.
1. Whether the power plug is loose or dropped?
2. Whether the voltage is normal?
3. Whether the power fuse is break?
4. Whether the power is down?
5. Whether the set temperature is higher than that of the chamber?
Failure analysis
They are not the failure symptoms:
1. When the compressor is working, the surface temperature can reach 80~90℃.
2. Sometimes, you can hear the bicker in the Wine Cooler, which is the sound of refrigerating
agent flowing in the refrigeration system.
3. When the ambient humidity is too high, there may be condensation phenomenon on the
surface of the Wine Cooler. Wipe it with soft cloth.
Note: if the methods of examination after the treatment, your wine storage cabinet does not work
properly, please contact the local authorized repair department.
17