Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
g)
Children or unauthorised persons are forbidden to
enter a work station. (A distraction may result in loss
of control over the device).
h)
Use the device in a well-ventilated space.
i)
Regularly inspect the condition of the safety labels. If
the labels are illegible, they must be replaced.
j)
Please keep this manual available for future
reference. If this device is passed on to a third party,
the manual must be passed on with it.
k)
Keep packaging elements and small assembly parts
in a place not available to children.
l)
Keep the device away from children and animals.
m)
Be careful when using the device in areas where
flammable materials are present. Do not use the
device pointing to the same area for an extended
period of time.
n)
Note: Heat can also be transferred to combustible
materials that are out of the user's sight.
REMEMBER! When using the device, protect
children and other bystanders.
2.3. PERSONAL SAFETY
a)
Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b)
The device is not designed to be handled by persons
(including children) with limited mental and sensory
functions or persons lacking relevant experience
and/or knowledge unless they are supervised by
a person responsible for their safety or they have
received instruction on how to operate the device.
c)
The device can be handled only by physically fit
persons who are capable of handling it, properly
trained, familiar with this manual and trained within
the scope of occupational health and safety.
d)
When working with the device, use common sense
and stay alert. Temporary loss of concentration while
using the device may lead to serious injuries.
e)
To prevent the device from accidentally switching on,
make sure the switch is on the OFF position before
connecting to a power source.
f)
The device is not a toy. Children must be supervised
to ensure that they do not play with the device.
2.4. SAFE DEVICE USE
a)
Do not overload the device. Use the appropriate
tools for the given task. A correctly-selected device
will perform the task for which it was designed better
and in a safer manner.
b)
Do not use the device if the ON/OFF switch does not
function properly (does not switch the device on and
off). Devices which cannot be switched on and off
using the ON/OFF switch are hazardous, should not
be operated and must be repaired.
c)
Disconnect the device from the power supply
before commencement of adjustment, cleaning and
maintenance. Such a preventive measure reduces
the risk of accidental activation.
d)
When not in use, store in a safe place, away from
children and people not familiar with the device who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
e)
Keep the device in perfect technical condition.
Before each use check for general damage and
especially check for cracked parts or elements and
for any other conditions which may impact the safe
operation of the device. If damage is discovered,
hand over the device for repair before use.
EN
f)
Keep the device out of the reach of children.
g)
Device repair or maintenance should be carried out
by qualified persons, only using original spare parts.
This will ensure safe use.
h)
To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
i)
Do not move, adjust or rotate the device in the
course of work.
j)
Do not leave this appliance unattended while it is in
use.
k)
Clean the device regularly to prevent stubborn grime
from accumulating.
l)
The device is not a toy. Cleaning and maintenance
may not be carried out by children without
supervision by an adult person.
m)
It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
n)
The heating plate heats up to high temperatures
during operation. Caution is advised as contact with
the plate may lead to burns.
o)
Do not place large / heavy objects on the heating
plate, it may damage the plate surface, which may
affect the heat transfer and adsorption.
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there
is still a slight risk of accident or injury when using
the device. Stay alert and use common sense when
using the device.
3. USE GUIDELINES
The device is designed for separating the display screens of
cell phones, smartphones, tablets, etc.
The user is liable for any damage resulting from
unintended use of the device.
3.1. DEVICE DESCRIPTION
A
B
C
D E
F
A.
Upper casing
B.
Heating plate
C.
Lower casing
D.
Switch Mode Power Supply "SMPS"
E.
Pump
F.
Power socket
17.05.2019
8
2
ON
1
5
50
80
120
OF F
3
122
176
248
ON
POWE R
OFF
8
6
4
7
ON
5V 2A
Suction Switch
OF F
US B
Heating Switch
1.
Main ON / OFF switch
2.
Temperature display
3.
Suction function button
4.
Button to decrease the set value
5.
Quick set button for defined temperature and
indicators (50°C/122°F | 80°C/176°F | 120°C/248°F)
6.
Temperature ON / OFF button
7.
Button to increase the set value
8.
USB socket (charge function)
3.2. PREPARING FOR USE
Ensure good ventilation in the room in which the device
is being used. There should be at least 10 cm distance
between each side of the device and the wall or other
objects. The device should always be used when positioned
on an even, stable, clean, fireproof and dry surface, and
be out of the reach of children and persons with limited
mental and sensory functions. Position the device such that
you always have access to the power plug. The power cord
connected to the appliance must be properly grounded
and correspond to the technical details on the product
label.
3.3. DEVICE USE
3.3.1. OPERATING THE DEVICE:
1)
Connect the device to a power supply.
2)
Place the silicone pad on the heating plate so that
the holes in the pad exactly match those in the plate.
3)
Turn the device on with the main ON/OFF switch. '---
' will appear on the display and the device will switch
to standby mode.
4)
Press ON/OFF temperature button. Then press the
Defined Temperature Selection button to set the
temperature to 50, 80, 120°C, or press the Reduce/
Increase button to set a different temperature. The
device will start heating. Caution: The recommended
temperature is 80°C: too high a temperature may
damage the screen.
5)
When temperature is stabilised, place the screen
on the silicone pad so that the holes are covered.
Then turn on suction with the suction switch; the
screen will be pulled to the heating plate. After that,
the touch screen can be separated from the display
using a cord with handles.
6)
After work is finished, turn the device off with the
main ON/OFF switch.
Caution:
•
The device should not be used in places where air
flow rate is too high. When air flow rate is too high,
the heating plate temperature will be too low, which
will affect operation of the device.
•
Keep the surface of the heating plate clean. Prevent
foreign objects from falling into the holes in the
heating plate and, consequently, into the vacuum
pump; it may affect adsorption quality.
17.05.2019
EN
3.3.2. SWITCHING BETWEEN CELSIUS AND FAHRENHEIT
UNITS
1)
Turn the device on with the main ON/OFF switch,
then press ON/OFF temperature button; "ºC" will
flash on the display.
Press the Reduce/Increase Value button to set
a different temperature unit (Celsius or Fahrenheit).
2)
Press ON/OFF temperature button, "00" will flash
on the display and the device will switch to the
temperature equalization mode. Press ON/OFF
temperature button again to save the settings.
3.3.3. TEMPERATURE EQUALIZATION
1)
Turn the device on with the main ON/OFF switch and
then press the ON/OFF temperature button; "ºC" will
flash on the display. Press the ON/OFF temperature
button again; "00" will flash on the display and the
device will switch to the temperature equalization
mode.
2)
Press the Reduce/Increase Value button to offset
the difference between indicated and measured
temperature
of
the
heating
plate
Temperature equalization range -50ºC ~ + 50ºC.
3)
After performing temperature equalization, press
ON/OFF temperature button to save the settings.
3.4. CLEANING AND MAINTENANCE
a)
Unplug the mains plug and allow the device to cool
completely before each cleaning, adjustment or
replacement of accessories, or if the device is not
being used.
b)
Use only non-corrosive cleaners to clean the surface.
c)
After cleaning the device, all parts should be dried
completely before using it again.
d)
Store the unit in a dry, cool place, free from moisture
and direct exposure to sunlight.
e)
Do not spray the device with a water jet or submerge
it in water.
f)
Do not allow water to get inside the device through
vents in the housing of the device.
g)
The device must be regularly inspected to check its
technical efficiency and spot any damage.
h)
Use a soft cloth for cleaning.
9
surface.
Publicité
Table des Matières
