Franklin Chef FIM35 Manuel De L'utilisateur page 27

Problem
Cubes are partially
formed or are Not enough water in the
white at the water trough.
bottom.
The feet are not leveled and
Noise during
locked.
operation
Certain sounds are normal. See "Normal Sounds".
The electricity is off.
The room temperature is
out of the stated range.
The ice maker
stops suddenly
The ice storage bin is full of
while making ice.
ice.
The drainage tray on top of
the compressor is full.
The body of the
The grounding line isn' t in
ice maker is
the socket.
electrified.
Scaling occurs
The hardness of the water is
frequently inside
too high.
the machine.
The ice maker
The drainage tray on top of
makes an alarm
the compressor is full.
sound regularly.
Possible Cause
25
Probable Correction
Check if the water supply pressure is
below 15 psig.
Check water supply; filter may be
restricted.
Check for a water leak at the water
trough.
Level and lock the feet. See "Leveling
the Ice Maker".
Reconnect the power supply line.
Cut off the electricity; let the ice maker
stop working until the temperature
returns within the stated range.
Remove some ice cubes; make sure the
ice-full probe is free of ice.
Drain off water by unscrewing lower
drainage nut.
Use a socket meeting the required
electrical standard.
Use a water-softening device installed
in front of the water inlet.
Drain off water by unscrewing lower
drainage nut.