Major Functions - Franklin Chef FIM35 Manuel De L'utilisateur

4. Mode button: Mainly for service. When this button is pressed, unit can change from
Ice Making mode to Ice Harvest mode, or from Ice Harvest mode to Ice Making
mode. You can judge the mode from the status of the green and yellow LEDs.
5. Ice size adjust: Turn the screw clockwise, and the size of individual ice cubes will
be larger in the next cycle; the cycle time will be longer. Turn the knob counter-
clockwise, and the ice size will be smaller in the next cycle.
IMPORTANT:
•
It is not recommended that the ice size be adjusted unnecessarily since this could
damage the machine' s controls.
•
Avoid letting water contact the control box.

Major Functions

1. Completely automatic operation.
2. When the ice storage bin is full, the machine stops making ice and proceeds to the
cold preservation stage automatically. It starts making ice again once the cubes are
removed.
3. When the drainage tray on top of the compressor is full of water, the machine stops
working and alarms at regular intervals. Only when you drain off water by unscrewing
the lower drainage nut does the machine resume working.
4. The different colors of the LED display indicate various work modes.
5. The fan motor responds to the ambient temperature. If it is cold, the motor will stop
working to keep the cooling system in good working condition.
6. Ice cube size is adjustable.
7. A sensitive probe and accurate timer enhance the performance of the ice maker.
8. Built-in compressor protection system.
23